Home

Let’s talk about wall plates and data points

Simply said, a data point is a device that extends your connection from one point to another, most typically a cabled network connection from your modem or router to another location in your home or office. You can check out the process of data point installation at Lightning Electrical Group for better knowledge.

Data points on Wifi vs. Wired

If you have a lot of internet-connected gadgets in your home or office, wireless networking might not be enough. Due to restricted capacity and higher latency, wireless connections are typically much slower than cable connections, especially as more devices are added to the wireless network.

Data points and wall plates come in a variety of shapes and sizes. Lightening Electrical Group can install a number of data point outlets and connections in your house or office, including:

AV Outlets on the Wall
Combination Plates for the Wall
Points on the traditional phone wall
Wall outlets with a single port
Wall outlets with several ports

What should I do with network data points that are cabled?

Extra data points can be used in your home for the following scenarios:

Connection to a Home Theater
Console games with low latency Home security, such as CCTV cameras
Data from the NBN and ADSL
Hubs for Smart Wiring
Networking on the computer
Television and social media networking
Your printers should be printed and networked.

Installing Data Points: Some Points to Consider

While you can install data points yourself, it is preferable to engage an electrician.
Installing a data point necessitates an understanding of how internet connections function.
You’ll also be working with electrical cables, so you’ll need to know how to fix them.
The installation will be successful if you hire an electrician.

When putting a data point in your home, keep these pointers in mind.

Select a Central Location

You must first establish where your central location is before you can pick where you want to deploy the data point.
A convenient area where the internet may feed through a switch is known as a central location.
The data is then fed into numerous data points across your home through a switch.
If only one data point is required, the central position should be close to, if not in, that particular room.
The garage is the most common central location for most households.
Information enables users to connect to the internet from outside their home and feed it through the walls to their data points.
They merely need to walk into the garage to turn data points on and off.
The central location should be a convenient location.
It should be off the beaten path as well.
You can end up with a lot of switches, which will detract from the aesthetics of your walls.
It’s best to put the central position in an underused closet or garage.